energy-surplusEnergy surplus


COMPONENT’S PROPERTIES

GUI

This component’s sample  is made by using Graphic UI gateway.

Please refer to “Gateways / Protocols” chapter in order to get further info.

Power consumption meter: Power meter component in charge of power consumption metering;

Min power threshold [W]: thereshold [Watt] beyond which the first load is powered off;

Customizable min power threshold: Tuner component that allows to customize the threshold value;

This tuner can be added to the user interface to let users customize the min power threshold.

Power on delay [s]: delay between the power on of a load and another [seconds];

Shut off delay [s]: delay between the shutdown of a load and another [seconds];

Loads: loads list which have to be taken into account for the Energy surplus function;

Selection is carried out by dragging Load components from “My components” area to the box.

Loads priority: the order of this list defines the activation priority of the loads (priority from top to the bottom) and the shutdown priority of the loads (priority from bottom to the top).

Load control disabling switch: Switch component that defines if the function is enabled or disabled;

This switch can be added to the user interface to let users enabling / disabling the load control function.

Status: it defines whether the function is enabled or disabled. This status has priority on the previous field;

Note: text field available for additional information on the component from the admin side.

HELP Load control configuration can be easily carried out by using component’s drag&drop function. When setting components on Component’s parameters, you can use the drop down menu, or you can drag and drop them from “My components” area to the component selection field.
Reminder before continuing:

  • Download and Install EVE Logic plugin to enable plugins (link);
  • After loading .eve project to the server, wait a couple of minutes for logics activation.

Well done, keep learning!

Our suggestion for your next lesson: Chart

This guide explains how to configure the component that displays the chart of recorded data.