Contents

Introduction

Remote Scenario Configuration Mode

Rec Scene

Reset Scene

Introduction


The system EVE allows the management of countless scenes. This is helpful to eliminate repetitive operations and speed up the control of the building. EVE Remote Plus app allows also the record of personal scenes directly through the user interface without EVE Manager configuration software.
The Remote Scenario is a module which needs to be added on your user interface using EVE Manager configuration software. This is an object that allows to record customized scenes to perform with a simple button within your user interface.

Remote Scenario Configuration Mode


Tap and hold the Remote Scenario icon to access the recording scene configuration mode . Once done, the home icon begins to flash of a different color ( red ). From now on, you will be navigating using the recording scene configuration mode until you will click on the home icon again.

Rec Scene


Tap and hold the Remote Scenario icon to access the recording scene configuration mode . Once done, the home icon begins to flash of a different color ( red ). Navigate through your user interface and command the objects that you want to add to your scene :

  • turn on / turn off switches and lights;
  • dim lights to customized percentage;
  • open / close shutters and blinds;
  • power on / power off the A/V system;
  • activate / deactivate the alarm system;
  • increase / decrease the room temperature or set a mode .

When you think the registration is complete, tap and hold the initial Remote Scenario icon to exit the recording scene configuration mode and confirm the registration. From now on, simply tap on that Remote Scenario icon to trigger the scene you have just recorded.

In case you accidentally access the recording scene configuration mode, simply tap on the Remote Scenario icon to exit without editing the recorded scene.

Reset Scene


In order to reset a Remote Scenario to reconfigure it, tap and hold the Remote Scenario icon to access the recording scene configuration mode, then tap and hold the Remote Scenario icon again. Without making any new changing, the Remote Scenario will record “ no actions ” which means you delete the previous recording and it brings the configuration to the initial state. Now it will be possible to record a new scene as explained in the above paragraph.